Cabletron Systems SmartSWITCH 7H02-06 User Manual

Cabletron Systems SmartSWITCH 7H02-06 User Manual Manual pdf 10 page image

1-2Introduction1.2 THE 7H02-06 MODULEThe 7H02-06 Module provides six Fast Ethernet ports via 5 RJ45connectors and one FEPIM. The 7H02-06 Module can be installedin:• The 7C03 MMAC SmartSwitch• The 7C04 Workgroup SmartSwitch Chassis• The 7C04-R Workgroup SmartSwitch Redundant ChassisThe 7H02-06 Module has one backplane connection and six frontpanel connections. The backplane connection provides power tothe 7H02-06 Module and a channel for communication with the7X00 SmartSwitch Control Module. The six front panel portsprovide Category 5 Twisted Pair (UTP) and one user configurableport for UTP or multimode fiber optic connectivity (through theFEPIM).1.2.1 Cable Type and FEPIMsThe 7H02-06 module has six front panel connectors that interface tothe 7X00 SmartSwitch through the chassis backplane. 100 Base-TXconnections are provided through 5 RJ45s; one FEPIM provides 100Base-TX (via RJ45) or 100 Base-FX (via multimode SC).Note: UTP operates at 10/100 Mbps, while Fiber operates at 100 Mbps.Both UTP and Fiber are capable of half or full duplex operation.