MIB Reference 51portSdlcOperDisableRequestDisconnect (portSdlcOperTable.1.9)portSdlcOperLPDASupport (portSdlcOperTable.1.10)portSdlcOperConnector (portSdlcOperTable.1.11)portSdlcOperSpeed (portSdlcOperTable.1.12)portSdlcAdminIdleFillChar (portSdlcOperTable.1.13)portSdlcAdminInactivityTimer (portSdlcOperTable.1.14)portSdlcAdminL1Duplex (portSdlcOperTable.1.15)lsSdlcAdminTable (portSdlcGroup.3)This table contains information about the PUs configured on an SDLC port. Note thatdeleting of a PU entry does not affect the existence of the PU for the running protocol.The PU record is removed from the database file, but will remain known to the nodeuntil it is rebooted or until an online update of the port is performed. This is consistentwith the way PU information is handled when configuring through the user interfacemenu system.lSSdlcAdminLocalSubSYNTAX: NlSubscriberAddressACCESS: Read/WriteSTATUS: MandatoryDESCRIPTION:Local subscriber ID of the link station.::= { lsSdlcAdminTable.1.1}lSSdlcAdminRemoteSubSYNTAX: NlSubscriberAddressACCESS: Read/WriteSTATUS: MandatoryDESCRIPTION:Remote subscriber ID used to connect to remote linkstation.::= { lsSdlcAdminTable.1.2}lSSdlcAdminAutoCallSYNTAX: INTEGER {No (1), Yes (2)}ACCESS: Read/WriteSTATUS: MandatoryDESCRIPTION:Determines whether autocall is enabled for the link station.If enabled, the link station will initiate connection estab-lishment, when appropriate. Otherwise, the link stationwill listen to the connection request for establishment of aconnection with the remote PAD.::= { lsSdlcAdminTable.1.3}
