Cabletron Systems SmartSwitch 9000 Appendix

Also see for SmartSwitch 9000: Reference guide Appendix Appendix Appendix User guide

Contents

9X4XX Series Local Management6Reboot After Download (Toggle) (Only available for the RUNTIME option)This field notifies a user that the module will reboot after the download iscomplete. This field toggles between the following:• YES - The module reboots after the download is completed.• NO - The module continues using the existing firmware image and stores thenew firmware image in Flash memory. When the module is reset or during thenext power up, the device boots from Flash memory using the new image.TFTP Gateway IP Addr (Modifiable)This field displays the IP address of the TFTP gateway server defined on theGeneral Configuration screen.Last Image Server IP (Read-Only)This field displays the IP address of the server used for the previous FlashDownload.Last Image File Name (Read-Only)This field displays the complete path and file name of the last image downloadedto Flash.Transfer Status (Read-Only)This field displays the status of the current or most recent download or upload.Using RUNTIME to Download an Image FileTo download an image file using RUNTIME:1. Use the arrow keys to highlight the Download Method field.2. Press the Space Bar to select RUNTIME.3. Use the arrow keys to highlight the Reboot After Download field.4. Use the Space Bar to select either of the following:• YES - A user wants the module to reboot after the download is completed.• NO - A user wants the module to store the new image in Flash memoryuntil the module is manually reset.5. Use the arrow keys to highlight the TFTP Gateway IP Addr field.6. Set the IP address of the TFTP gateway server (this defaults to the same IPaddress as that set in the TFTP Gateway IP Addr field on the GeneralConfiguration Screen).7. Use the arrow keys to highlight the Download Server IP field.