Cabletron Systems TRRMIM-2AT Installation Manual

Also see for TRRMIM-2AT: User guide

Cabletron Systems TRRMIM-2AT Installation Manual Manual pdf 27 page image

REQUIREMENTS/SPECIFICATIONSPage 2-1412, via the FNB to Slot 1 ports 2, 5, 8, 12. It then returns to Slot 2and out the Ring-Out port of the TRRMIM-2AT.For the ring order of other Cabletron Systems Token Ring products,refer to the specific product manuals.2.3.3 LANVIEW LEDsThe LANVIEW LEDs, their locations, and functions are the samefor the three repeaters. Their locations are illustrated on theTRRMIM-2AT in Figure 2-1. Definitions for the LANVIEW LEDs onthe front panel of the repeaters are listed in Table 2-8.The TPIMs also have a LNK (Link) LED on their front panel whichlights when Phantom current is received at that port.