Chapter 4: Management4-14HSIM-W85 User’s GuideExample:4.2.3 Special Commandsdone, quit, exitSyntax: donequitexitDescription: The done, exit, or quit command enables the user to exitfrom Network Tools and return to the Main Menu screen.All three commands perform the same function.Options: Not ApplicableExample: Screen returns to previous menu.TIPTo find the MIB II interface indexes assigned to the ds1channels used in the IMUX group, utilize the dsx1 andds1alarm commands. With the dsx1 command, the interfacenumbers are in the column under “line” in the display. When theds1alarm command is used, the interface numbers, as well asthe HSIM ID and the ds1 index, can be seen for verification.Also, in the Interface Statistics screen, as the Interfaces areincremented, the Name of the interface can be seen, and thenused to correlate with the number to identify it.2689_8-> ds1extDS1 Extensions Configuration:Channel LineLine CRC Line Code Build Out29 16 none 0 db30 16 none 0 db31 16 none 0 db32 16 none 0 db33 16 none 0 db34 16 none 0 db35 32 jBZS 0 db36 16 none 0 db->