Black plate (5,1)Cadillac Escalade/Escalade ESV Owner Manual - 2011Lighting 6-5Disabling and ResettingIntelliBeam at the Rearview MirrorIntelliBeam can be disabled byusing the controls on the insiderearview mirror.AUTO 3 (On/Off): To disablethe system, press this button onthe inside rearview mirror. TheIntelliBeam indicator will turn offand will not come back on until theIntelliBeam button is pressed again.(Stalk Disable): When IntelliBeamhas turned on the high-beams,pull or push the high-beam stalk.This will disable IntelliBeam.The IntelliBeam indicator on themirror will turn off. To re-enableIntelliBeam, press the IntelliBeambutton on the mirror.A different sensitivity setting isavailable for dealer diagnostics.This is done by pushing and holdingthis button for 20 seconds until theIntelliBeam indicator light flashesthree times. If you accidentallyactivate this, the vehicle's settingwill automatically be reset each timethe ignition is turned off and then onagain.Cleaning the IntelliBeam LightSensorThe light sensor is located on theinside of the vehicle in front of theinside rearview mirror.Clean the light sensor window,periodically, using glass cleaner ona soft cloth. Gently wipe the sensorwindow. Do not spray glass cleanerdirectly on the surface of the sensorwindow.Exterior Lamps OffReminderIf a door is open, a reminder chimesounds when the headlamps orparking lamps are manually turnedon and the key is out of the ignition.To turn off the chime, turn theheadlamp switch to off or AUTOand then back on, or close andre-open the door. In the AUTOmode, the headlamps turn off oncethe ignition is in LOCK/OFF orremains on until the headlamp delayends (if enabled in the DIC). See“Exit Lighting” under VehiclePersonalization on page 5‑40.InformationProvidedby:
