Black plate (20,1)Cadillac Escalade Owner Manual (GMNA-Localizing-MidEast-7574628) -2015 - CRC - 8/27/149-20 Driving and OperatingThe vehicle may have a memoryfunction, which lets pedal settingsbe saved and recalled. See MemorySeats on page 3-7.Ignition PositionsVehicles with Keyless Access havepushbutton starting.Pressing the button cycles it throughthree modes: ACC/ACCESSORY,ON/RUN/START, and Stopping theEngine/OFF.The transmitter must be in thevehicle for the system to operate.If the pushbutton start is notworking, the vehicle may be near astrong radio antenna signal causinginterference to the Keyless Accesssystem. See Remote Keyless Entry(RKE) System Operation onpage 2-2.To shift out of P (Park), the vehiclemust be in ACC/ACCESSORY orON/RUN and the brake pedal mustbe applied.Stopping the Engine/LOCK/OFF (No Indicator Lights): Whenthe vehicle is stopped, press theENGINE START/STOP button onceto turn the engine off.If the vehicle is in P (Park), theignition will turn off, and RetainedAccessory Power (RAP) will remainactive. See Retained AccessoryPower (RAP) on page 9-23.If the vehicle is not in P (Park), theignition will return to ACC/ACCESSORY and display themessage SHIFT TO PARK in theDriver Information Center (DIC).See Transmission Messages onpage 5-44. When the vehicle isshifted into P (Park), the ignitionsystem will switch to OFF.Do not turn the engine off when thevehicle is moving. This will cause aloss of power assist in the brakeand steering systems and disablethe airbags.The vehicle may have an electricsteering column lock. The lock isactivated when the vehicle isswitched to OFF and either frontdoor is opened. A sound may beheard as the lock actuates orreleases. The steering column lockmay not release with the wheelsturned off center. If this happens,the vehicle may not start. Move thesteering wheel from left to rightwhile attempting to start the vehicle.If this does not work, the vehicleneeds service.
