Contrast/BrightnessTo adjust the contrast or brightness of the navigationscreen, touch the plus (+) or minus (–) sign screenbuttons to increase or decrease the contrast or brightnessto the desired level. You will see the screen change asyou adjust the contrast or brightness.Screen ColorWhen the exterior lamps are on during the day, thenavigation screen will change to a lighter backgroundand change colors for better viewing in the daylight.At night, the screens background will become darker.Touch the Auto screen button for automatic adjustment.Touch the Day or Night screen buttons to select dayor night mode regardless of the lighting conditions.The Day setting leaves the system in the day mode.The Night setting leaves the system in the night mode.BeepWith this feature on, a beep will sound every time ascreen button is pressed on the navigation screen.Select Off to turn the beeps off.Vehicle ChimeNotice: The chime signals related to seat belts,parking brake, and other functions of your vehicleoperate through the navigation/radio system. If thatequipment is replaced or additional equipment isadded to your vehicle, the chimes may not work.Make sure that replacement or additional equipmentis compatible with your vehicle before installing it.This feature allows you to adjust the chime volume levelin your vehicle. Touch the Normal screen button fornormal chime volume or the Loud screen button for alouder chime volume.LanguageYour vehicle has been set for the English language,but you may also select French for all instructionaltext and voice prompts. However, names on the mapwhen using the navigation functions will not change.To change the language, the map DVD must beinserted. Then, do the following:1. Touch the Language screen button.A caution will display.2. Touch the desired language to select it.3. Touch the NEXT screen button to change thedisplay back to the map screen.If the language is changed from English, the menuscreens will not match word-for-word as they appearin this manual.If you accidentally select a language you do notunderstand, press the CONFIG hard key, then selectthe desired language.2-30