Cairn OptoLed Lite Instruction Manual
                     | |
Important InformationPlease Read Before Installing andOperating Your OptoLED LiteFor maximum reliability and safety we recommend using the equipmentwithin certain guidelines. If in any doubt, then please feel free to contactour technical support department (e-mail tech@cairnresearch.co.uk).The following points should be considered when using the OptoLED for thefirst time:1. The OptoLED is capable of producing very intense illumination. The LEDheads should NEVER be viewed directly. If testing the LEDs then ALWAYSshine them at a white surface and view the resultant reflection orfluorescence. This is especially important with ULTRAVIOLET LEDs whichwill not appear bright to the human eye, but can cause permanentdamage if not used with care.2. Our standard LED heads have built in protection to avoid damage,however if in any doubt then please check with Cairn as to the ratedpower of the supplied heads, and use accordingly.3. The OptoLED is typically supplied in conjunction with our modularmicroscope coupling system. Please refer to the separatedocumentation regarding your particular configuration.4. The OptoLED system supports a vast range of different LEDs and LEDarrays. Different sized LEDsrequire different condenser lenses. Wealways try to optimise the condensers for the LEDs ordered, but if yourequire help with optimisation then please ask. |
Related manuals for Cairn OptoLed Lite
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine