CalAmp SMC-GPRS- Series User Manual

Also see for LandCell SMC-GPRS Series: User manual

Contents

CalAmp SMC-GPRS- Series User Manual Manual pdf 39 page image

001-0004-829 Rev01Page 39 of 73AT+ILRRSet TE-TA local rate reporting:0 - Disables reporting of local port rate1 - Enables reporting of local port rate300, 600, 1200, 2400, 4800, 9600, 14400, 19200, 28800, 38400, 57600,115200, 230400, 460800 rates supportedAT+IPRSet fixed local rate:300, 600, 1200, 2400, 4800, 9600, 14400, 19200, 28800, 38400, 57600,115200, 230400, 460800 rates supportedAT^STPBTransmit Parity Bit (for 7E1 and 7O1 only):0 - The parity bit will not be transmitted over the air and will be replaced with 0.This mode is the default setting if 7E1 or 7O1 is activated with AT+ICF.1 - In a data connection 8 bits will be transmitted, including the parity bit, i.e.the parity bit will be properly transmitted over the air. The setting shall be usedif problems are encountered when TC65 is running in the default 7E1 or 7O1mode enabled with AT+ICF. In this case, AT^STPB=1 shall be set in addition tothe 7E1 or 7O1 settings selected with AT+ICF.Security CommandsThe AT Commands described in this section allow the external application to determine varioussecurity related settings.Table 10.6: Security CommandsCommand DescriptionAT+CPINPIN Authentication:AT+CPIN? command returns an alphanumeric string indicating whether or notnetwork authentication is required.AT+CPIN=, command allows the modem to store the enteredpassword.AT+SPICDisplay PIN counter:Command used to find out whether the ME is waiting for a password and, if so,how many attempts are left to enter the password.AT+CLCKFacility lock:Command can be used to lock, unlock or interrogate a network or ME .The command can be aborted when network facilities are being set orinterrogated. The facility for the SIM PIN is ―SC‖.AT+CPWDChange Password:AT+CPWD=, , Command allows user to define a new password for a password protected lock function. Each password is a string of digits, the length of whichvaries with the associated . The test command returns a list of pairswhich represent the available facilities and the maximum length of theassociated password. The facility for the SIM PIN is ―SC‖.