CalGym CG-7505 Owner's Manual
                    | |
BY TUFFSTUFF FITNESSCG-7505 Pectoral ContractorStep 515WARNING:CABLE BOLT (#70) MUST BE THREADED A MINIMUM OF 5/8” WITH REGULAR NUT AND SPLITWASHER TIGHTEN SECURELY TO ENSURE PROPER CONNECTION SEE FIGURES B AND C.Weight stack label and lubrication instructions:1. Wipe front surface of weight stack with rubbing alcohol and wipe dry.2. Peel off back sheet (adhesive side) from label and make sure that the label remainsattached to the application tape.3. Line up left edge of label sheet with outside edge of weight holes.4. Line up the first label to hole on top plate.5. Make sure label is straight and slowly press into place.6. Gently remove application tape and rub each label firmly against the weight stack.7. Allow labels to stand for 2 days to allow adhesive to cure fully.8. Open the lube package provided and apply a thin film of lubricant around the first 3 inchesof the guide rods above the top plate.9. After the cables are installed, do a set of reps to spread the lubricant thoroughly.Cable Adjustment1. Adjustments can be made in the area pointed out (FIGURE B) to set the correct tension onthe cable.2. Upon completion of assembly, the TOP PLATE (#19) does not sit on top of the first WEIGHTPLATE (#18), push the TOP PLATE (#19) down, insert the SELECTOR PIN (#14) and performseveral repetitions. This will self-adjust and re-align the cable system.3. After completing the previous step, the TOP PLATE (#19) still does not sit on top of the firstWEIGHT PLATE (#18) or if there is excess slack in the cable system, loosen regular nut (#38)and adjust split hex tap bolt (#70) in/out to give the cable proper tension (taut). Onceachieving the proper tension, re-tighten regular nut (#38).Assembly ListItem # Description Qty. Item # Description Qty.5 CAM 2 24 BRONZE BUSHING 3/8 X 1/2 X 5/16 17 FRONT FRAME 1 28 LABEL-WEIGHT NUMBERS 1-20 DOTS Ø11/16 18 GUIDE ROD 3/4 RD X 48 1/4 2 38 FINISHED HEX NUT Z/P 1/2 -13 111 PEC DEC CABLE 1 54 NYLON INSERT LOCK NUT Z/P 5/16-18 114 SELECTOR PIN W/COIL 3/8 X4 GOLD KNOB 1 68 SHOULDER BOLT ALLOY 3/8 X 3/4 116 TENSION CABLE 1 70 SPLIT HEX TAP BOLT GR-8 Z/P 1/2 -13 X 3 1/2 118 10 LB STEEL WEIGHT PLATE BLACK 19 71 SPLIT LOCK WASHER Z/P 1/2 119 10 LB TOP PLATE W/ADJUSTABLE SELECTOR BAR 1 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine