Caliber 35459 User Manual
              | |
11SPEAKER REMOVALPerform the following steps to remove the speaker from its installed location.1. Pull the edge of the magnetic speaker grille to remove it from the speaker frame.2. Insert the 6mm hex wrench end (labeled detach) of the included L-shapedinstallation tool into each hole on the speaker frame. Turn it counterclockwise untilthe spring loaded tab snaps into place.3. The speaker can now be removed from its installation hole.HIGH-FREQUENCY ROLL-OFFThis speaker is equipped with a high-frequency roll-off option, which can be used toattenuate the high-frequency response. If the speaker sounds too "bright", perform thefollowing steps to set the high-frequency roll-off.1. Pull the edge of the magnetic speaker grille to remove it from the speaker frame.2. Slide the high-frequency roll-off switch to the -3dB or -6dB position. The default is0dB (no attenuation).3. Replace the grille onto the speaker frame.TECHNICAL SUPPORTMonoprice is pleased to provide free, live, online technical support to assist you with anyquestions you may have about installation, setup, troubleshooting, or productrecommendations. If you ever need assistance with your new product, please come onlineto talk to one of our friendly and knowledgeable Tech Support Associates. Technicalsupport is available through the online chat button on our website www.monoprice.comduring regular business hours, 7 days a week. You can also get assistance through email bysending a message to tech@monoprice.com |
Related manuals for Caliber 35459
manualsdatabase
Your AI-powered manual search engine