EN-BA107123444556689TO SUPPORT THE UNITDetaching and attaching the front panelThe front panel of this unit can be detached in order to prevent the unitfrom being stolen.DETACHING THE FRONT PANELBefore detaching the front panel, be sure to press the button topower off first. Then press the button and detach the panel by pullingit towards you as illustratedATTACHING THE FRONT PANELMake sure the front panel is in the right way up when attaching it to the unit as it cannot be attached upsidedown. Bring side B of panel to side A of main unit.Insert the panel in and push until it clicks. Panel is attached.Notes:• Do not press the front panel hard against the unit when attaching it.It can be easily attached by pressing it lightly against the unit.• When you carry the front panel with you, put it in the supplied frontpanel case.• Do not press hard or give excessive pressure to the display windowof the front panel when attaching it to the unit.CLEANING THE CONNECTORThe unit may not function properly if the connectors between theunit and the front panel are contaminated with dirt. In order toprevent this from happening, detach the front panel by pressingthe button and clean the connector from time to time.Clean the connector with a cotton swab together with contactcleaner as illustrated. Be sure to clean them carefully pin by pinand make sure not to damage the connecting points.. UNIT. RELEASE CASE. DASH BOARD4. HEX NUT5. LOCK WASHER6. PLAIN WASHER7. CAR BODY8. REAR SUPPORT STRAP9. TAPPING SCREW0. M5 X 5 HEX BOLTDashboardBABACotton SwabRear offront panel Main unit