Caliber RCD234DBT Manual

Contents

Caliber RCD234DBT Manual Manual pdf 12 page image

13Owner’ ManualBasic Operation1. Tuning the unit On / OffPress PWR Button to turn the uniton, the display will show a messageWELCOME to indicate it is ready foruse. Press and hold the PWR buttonto turn the unit off. The display willshow a message “GOODBYE”.2. Mode SelectionPress the MOD Button to select Ra-dio Mode. Press the MODE Buttonto cycle the Play Mode amoung AUX,RADIO and CD PLAY.Note: USB & SD mode will only showon the display when a USB flashmemory or SD card is inserted intothe USB port or SD portt.3. Loudness ControlPress the SEL button until “LOUDOFF” is shown on the display indi-cates that the loudness function isOFF. Turn the volume knob to selectbetween ON or OFF.4. Mute ControlPress the POW/MUT button active orcancel Mute function.5. VolumeUse the VOL +/- Button to adjust thevolume level. The larger the number,the higher the volume level.6. TreblePress SEL Button repeatedly until thedisplay shows "TRE 00". Use the VOL+/- Button to adjust. When EQ is ON,treble control is not available.7. BalancePress SEL Button repeatedly until thedisplay shows "BAL L-R", then use theVOL +/- Button to adjust the balancebetween the left & right speakers.8. FaderPress SEL Button repeatedly until thedisplay shows "FAD F-R", then usethe VOL +/- Button to adjust the bal-ance between the front & rear speak-ers.9. ClockThe time clock can be set anytimewhen the power is on. Press the PTY/CLK Button on the faceplate or re-mote control once, the time will showon the display.Then press and hold the button untilthe hour blinks on the display. Rotatethe VOL knob to set hours, then pressthe VOL knob for the minutes to blinkand rotate the VOL knob to set.Press the PTY/CLK button again orleave the unit idle for new setting toeffect. Press the PTY/CLK buttonanytime to view the time clock display.10. Preset Beep Sound OffPress the SEL button repeatedly un-til “BEEP ON” is displayed. Turn theVOL +/- Button to select "BEEP OFF"or "BEEP ON", then leave the unit idlefor setting to take effect.11. Preset Equalizer FunctionPress the SEL Button repeatedly un-til “EQ” indication is displayed thenrotate the Volume knob to choosebetween the EQ sound effects. TheSequence of equalizer setting will beas follows:FLATOFF POP ROCKCLASSIC12althe unitwill playhe songause byor nextbutton.by op-cannotcar ra-ional)