Caliber RDD570BT Instruction Manual

Also see for RDD570BT: Quick start guide

( )(1)( )4 Insert the unit into the bracket, fasten the M4×6 screw to the fireproofingboard available at the back of the dashboard, and use 4 pieces of M2×2screw to lock the assemble bars and the mounting bracket in position.Note:According to the depth of the opening, use different length of assemblebebar accordingly. If the opening is too shallow, the monitor mayextended out 10mm from the dashboard.Method BInsert this unit directly to the opening of the dashboard.2 Place M4×3, M5×5 cylindrical screw or M5×5 cone shaped screwthrough the holes of the mounting frame located inside the openingto holes of the unit and fasten the screws to left & right.DashboardRubber SheathM5 X 24Long Assemble BarM2 X 2Mounting Bracket（Picture 2）Installation and uninstall371 1DashboardM5 X 5Mounting Frame