CamRanger CamRanger User Manual

Also see for CamRanger: User manual User manual User manual User manual

Contents

CamRanger CamRanger User Manual Manual pdf 22 page image

© CamRanger – Patent Pending 22MP-‐360 Tripod Head Hardware• Install Batteries: Open the battery compartment by sliding the cover downward and liftingit outward, insert the 4 AA batteries in the same position as the markings inside the batterycompartment.• Mounting the Motorized Pan Head: The motorized Pan Head may be fastened to any tripodor to any mounting device having a standard UNC ¼-‐20 thread mounting screw.• Mounting the Camera: Fasten the camera securely to the top of the motorized tripodusing the mounting screw, which is a standard UNC ¼-‐20 thread. Align the optical axis ofthe Camera with the long dimension of the Motorized Pan Head body.• Specifications:o Power source: 4 AA batteries or A/C adapter plug (neither included)o Vertical Tilt Angle: +/-‐ 15 degreeso Horizontal Panning Angle: 360 degrees with unlimited rotation(If purchased through CamRanger)o Maximum Camera weight: 6 lb (2.7 kg)o Size (L x H x W): 5.75 x 4.5 x 4 inches (145 x 115 x 103 mm)o Weight (without batteries: 1.75 lb (800 mg)Bubble level: If desired, place the included adhesive bubble level on the top of the tripod (onend with on/off switch).CamRanger, CamRanger PT Hub, and Tripod Setup• Required parts:o CamRanger*o CamRanger PT Hubo Motorized tripod (either the MP-‐360, Bescor, or Hague)*o USB cable (included with CamRanger or camera)o Serial Connector (included with the CamRanger PT Hub)o USB 2.0 A to B connector (included with CamRanger PT Hub)

/ 25

Related manuals for CamRanger CamRanger