Camco 26 dB User Manual

Contents

Camco 26 dB User Manual Manual pdf 22 page image

345124 OPERATIONUSER MANUALVORTEX 6, 4, 2.6 and 200VP.21VORTEX Filter Assembly1 Clip Apertures2 Injection Moulded Cradle3 Foam Filter4 Injection Moulded Surround5 Injection Moulded CAMCO Badge4.7 Filter CleaningThe air intake on the front of your VORTEX is fi tted with a removable filtersystem. If the filter becomes clogged, the unit will not cool as efficiently as itshould and may result in reduced output levels.For changing the filter, no tools are required: first, gently slide the whole plasticfilter assembly a few millimetres to the left and lift it from the front panel. Next,beginning on one of the long sides, carefully unclip the moulded surround (4)from the cradle (2) and then carefully pull the CAMCO badge (5) out of the fourfastening holes with both hands. Remove the foam filter (3) and clean it with amild dishwashing detergent and warm water. Once dry, replace the foam filtercarefully into the cradle and repeat the dismantling procedure in reverse. Insertthe five pins on the filter frame into the clip apertures (1) and slide the filtercarefully to the right to secure.