Camco Q-Power Series Specifications

Also see for Q-Power 10: User manual User manual

Contents

specifications

Camco Q-Power Series Specifications Manual pdf 2 page image

OFFSLOWFASTCLIP LIMITER26 dB 1,4 V32 dB26 dB 1,4 V32 dBDC BA:LEDOM:PMI/HCREPRWPTUPTUOYNAMREGNIEDAM:.ON.RESD ABCDo not remove this cover orconnect any loudspeakercables while the amplifier isrunning!See the manual for detailedcabling instructionsWarning! Risk ofelectrical shock.D C B AD C B A:LEDOM:PMI/HCREPRWPTUPTUOYNAMREGNIEDAM:.ON.RESwww.camcoaudio.comSpecifications: Q-Power 6 Q-Power 10Power per channelAll channels driven@ 1kHz, THD < 1%16 Ω 470 W 620 W8 Ω 800 W 1100 W4 Ω 1000 W 1800 W4 Ω Max RMS 1500 W 2500 W70 V line operation 950 W 1600 W100 V line operation N/A 625 WPower per channelSingle channel driven@ 1kHz, THD < 1%16 Ω 480 W 620 W8 Ω 960 W 1350 W4 Ω 1500 W 2400 W4 Ω Max RMS 1600 W 2600 WNo. of channels 4 4Max. Output Voltage 125Vp / 250Vpp 145Vp / 290VppOutput Circuitry Class H Class DSignal To Noise-Ratio20 Hz - 20 kHz, 8 Ω load> 115 dB (A-weighted)> 112 dB (unweighted)> 115 dB (A-weighted)> 112 dB (unweighted)THD+N (typical)20 Hz - 20 kHz, 8 Ω load,6 dB below rated power< 0,01 % < 0,01 %SMPTE 4:1 (typical)60 Hz + 7kHz, 8 Ω load8 dB below rated power< 0,01 % < 0,02 %Damping Factor8 Ω load, 1 kHz and below > 350 > 600Net Weight 10,6 kg / 23,4 lbs 11,5 kg / 25,4 lbsShipping Weight 12,6 kg / 27,8 lbs 13,5 kg / 29,8 lbsFrequency Response8 Ω load, 1 dB below rated power 20 Hz - 20 kHz ± 0,15 dBInput Impedance 15 kΩ balancedInput Gain selectable: 26 dB, 32 dB or 1,4 V input sensitivityProtection Circuitsinrush-current limitation, protection circuits against power on/off transients, temperature monitoring oftransformers and heat-sinks, output DC protection, power transistor control, temperature dependent SOAprotection, intelligent mains fuse protectionLimiter two switchable peak-limiter for channel A+B and C+D respectivelyFan 2 temperature dependent speed-controlled axial fansIndicators LED’s for ON, SIGNAL/PROTECT, CLIP, Output CurrentInput Connectors 3-pin XLR, male and female per channel, pin 2 = in phase / Phoenix Connectors, pin 1 = in phase, pin 2 = GNDOutput Connectors Two 4-pole SPEAKON connectors / Barrier Strip with protection coverOperation Voltage Dual Voltage SMPS with automatic voltage selection for 120 V / 230 V operationDimensions (WxHxD) 483 x 88,9 x 419 mm / 19 x 3,5 x 16,5 inches (19”, 2U)Shipping Dim. (WxHxD) 600 x 105 x 527 mm / 23,3 x 4,1 x 20,7 inchesAccessories included Gain pot security coverSpecifications subject to technical alterations without prior notice.Input Channel DGain Setting(26 dB, 32 dB, 1,4 V)Channel A & B output Input Channel C Input Channel BInput Channel AChannel C & D outputInput Channel D & CClip Limiter Channel D & C(Off, On)Input Channel B & AClip Limiter Channel B & A(Off, On)Channel D, C, B & A output (barrier strip)

/ 2

Related manuals for Camco Q-Power 10