Campbell UT20 Product Manual
Also see for UT20: Instruction manualProduct manualInstruction manual
                                               | |
Contents
| 
FIGURE 7-13. UTEYE eyebolt guy anchor7.1.3.2 UTDUK duckbill guy anchor1. Locate the three anchor locations (Base and Guy Anchor Layout (p. 10)). It is important thatthe anchors be driven at the same angle as the guy wires (FIGURE 7-14 (p. 23)). Insert thesteel drive bar into the anchor body and drive the anchor into the ground by using a fencepost driver or sledgehammer until only the top half of the loop remains above the ground.UT20 and UT30 Universal Towers 22 |
Related manuals for Campbell UT20
manualsdatabase
Your AI-powered manual search engine