Candy AQ 130 Instructions For Use Manual

Contents

Candy AQ 130 Instructions For Use Manual Manual pdf 13 page image

Note: it is advisable to turn off the tap after each washto isolate the washing machine from the water supply.For the washing machine to function properly the terminal end of the discharge hose (mouth)must be at a minimum of 50 cm and a maximum of 85 cm from the ground.ELECTRICAL CONNECTIONSAfter installation, the appliance must be positioned so that the plug is accessible.If the plug we supply does not fitCUT IT OFF AND DESTROY IT!You can’t use it on other appliances, and the exposed wires could be dangerous if plugged in.To fit a replacement plug, proceed as follows:Connect to the terminal in the pluggreen and yellow wire marked with the letter E,OR markedwith the symbol,OR coloured green,OR coloured green and yellow.blue wire marked NOR coloured black.brown wire marked LOR coloured red.WARNINGThis appliance must be earthedFuses and plugsThis appliance should be used only on a socket with a minimum rating of 13 Amp.Our ready-fitted plug is already equipped with a 13 amp fuse which is BS 1362 ASTAapproved. Any replacement should be exactly the same.If the fuse cover is lost, do not use the plug until it is replaced. A correct replacement fusecover (obtainable from your local retailer) must be the same colour as shown or named onthe insert on the base of the plug.Note: we recommend you keep the transit bracket,braces and screws to immobilise the machine for futuretransit.The Manufacturers will not be responsible for anypossible damage to the machine caused by notfollowing the rules relating to releasing the mechanism.The user is responsible for all costs of installation.Water connectionThe appliance must be connected to the water mainsusing new hose-sets.The old hose-sets should not be reused.Your machine may either be plumbed in or connectedto existing taps, using a tap adaptor with a 3/4 B.S.P.threaded end connection. The water supply hoses tobe found inside the drum are terminated in twodifferent ways. One end which has a 90° elbow is tobe connected to the appliance water connection Ewhile the straight end is to be connected to thedomestic supply tap. The hose with the white collarshould be connected to the cold tap, and the hosewith the red collar to the hot tap. The appliance is notsuitable for use with mixer taps.min 50 cmmax 85 cm+2,6 mt maxmax 100 cmmin 4 cmEHOTWATERCOLDWATER24 25