PREPARING THE WASH CYCLE1.- Once the washing is loaded, ensure that the drum doors are properly closed.2.- Add detergent and additives, not exceeding the maximum level indicator.• detergent for pre-wash I• detergent for wash programme II• bleach• fabric conditionerSELECTING THE DESIRED PROGRAMMES AND OPTIONS3.- Tur n the programme selector (A) to the desired programme. (clokwise).4.- Press the key or keys for any options desired (C1, C2).C1: easy iron keyThis function helps reduce creasing, depending on the programme selected and the type offabric washed. This works as follows:Mixed,Synthetics. Intermediate spins during rinses are eliminated, the final spin is a gentle spin.Delicates. Intermediate spins during rinses are eliminated and the machine stops before thefinal spin, which is a gentle spin.Hand wash, Woollens and Cotton. The machine stops before the final spin.Rinses. Intermediate spins during rinses are eliminated, the final spin is a gentle spin.To complete the wash cycle in the Delicates , Hand wash , Cotton, and Woollens programmes,press the Easy Iron key again: the machine will empty and perform the required spin.To empty machine of water with no spin, cancel the ongoing programme and select the EmptyprogrammeC2: extra rinse keyThe electronic system engaged by this key activates a new special rinse cycle. More water anda combination of drum rotation movements ensure that washing is perfectly rinsed. The key canbe activated in Cottons, Mixed, Synthetics, Delicates, and Rinses programmes.5.- Select spin speed if required (B1)B1 spin selectorUse this control to select the maximum spin speed within the range for the model of washingmachine in question and the programme selected (see programme table). The control can beturned in both directions. Spin speed may be selected at any time during the programme.6.- Select wash temperature if required (B2)B2 temperature selectorUse this control to select the wash temperature within the range for the programme selected(see programme table).The control can be turned in both directions. Select the required temperature before startingthe programme.7.- Once you have selected the desired options, press the START key (H). The washing machinewill start up .To cancel an option after setting, just press the option key again.