Models: CAST18R, CAST24R, CAST32RCAUTION19. When assembling, keep clear from any board or flammable material.20. The unit is for household use only. It is not suitable for use on a building site,greenhouses, barn or stable, where there’s flammable dust.21. The head of the unit is at high temperature during operation. Unplug the unitand wait till it’s cool before cleaning.22. The units (1800W & 2400W) should be plugged in a socket outlet, which is easilyvisible and reachable.23. DO NOT store or use any flammable liquids in the vicinity of this unit.24. DO NOT spray aerosols in the vicinity of this appliance whilst appliance is operating.Most aerosols are flammable, which can be a fire hazard if used neae appliance whenit is in use.25. DO NOT modify this appliance. Any modification may create a hazardous situation andvoid your warranty.26. DO NOT allow young children or the infirm to remain unsurpervised or sleep directlyinfront of or below the appliance while in operation.WARNING:This heater is not equipped with a device to control the room temperature.Do not use this heater in small rooms when they are occupied by personsnot capable of leaving the room on their own, unless constant supervisionis provided.IMPORTANT INFORMATION:Models CAST18R and CAST24R are fitted with an Australian / New Zealandflexible 1.8M cord and 3 pin plug. A dedicated 240V 50Hz earthed 10AMPsocket outlet must be used with this appliance.Model CAST32R are fitted with an Australian flexible 1.8M cord and can behardwired, or it can be fitted with a 3 pin, 15amp plug into a 15amp socketoutlet. This MUST only be performed by an authorised person. In accordancewith local regulations.DO NOT Coil or bundle the electric cord to reduce its length as overheatingmay result which could become a fire hazard.The electrical cord MUST NOT come into contact with the heated parts of thisappliance.DO NOT use this appliance as a portable heater. Use of an extension cord onthis appliance is not recommended.Page 4