Cannon FITZIB-SDSEB-NG User Instructions
                        | |
1513. Slide heater into the fireplace ensuring that gas inlet pipe is fed throughthe hole at the rear bottom RHS of the heater. Refer figure 24 and gasconnection figure 26.-14. With heater in position, flanges should be hard against masonry. Se-cure case flanges to the masonry. Refer figure 25.15. Connect incoming gas supply pipe to regulator. For inlet position seefigure 26. Close gate over gas supply and seal around the pipe withfibreglass insulation material. Sealing is important as it prevents leak-age from fan chamber into chimney: also check for gas soundness.2526Gas connections24 |
Related manuals for Cannon FITZIB-SDSEB-LP
Cannon FITZFS-SDSEB-NG User Instructions
Cannon FITZPIB User Instructions
Cannon FITZP User Instructions
Cannon FITZPIBPWR-02-NG User Instructions
Cannon FITZPIBPWR User Instructions
Cannon CANTIB User Instructions
Cannon CANT User Instructions
Cannon CANTERBUR User Instructions
Cannon Canterbury User Instructions
Cannon CANTERBURY User Instructions
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine