Cannon FITZP User Instructions

Also see for Fitzroy: Instruction manual Installation instructions

Contents

Cannon FITZP User Instructions Manual pdf 10 page image

101. This appliance is to be installed by a licensed service persononly.2. This appliance is to be installed in accordance with themanufacturer’s installation instructions, AS 5601/AG 601,Municipal Building Codes, Electrical Wiring Regulations andany other statutory regulations.3. Ensure the minimum clearances to combustible construction aremaintained during installation, including adequate space forthe proper operation and servicing of the heater.For clearances to curtains and furnishing refer to warning 3 onpage 4.For minimum clearances refer fig 9 and 10.4. Remove the carton from the heater and lift from pallet.Check that the heater is suitable for the gas available(Please dispose of packaging appropriately, keep away fromchildren).5. Prepare electrical and gas connections, a 10 Amp wall socketneeds to be located within 1.5m of the heater.6. Fit rear spacers as per figure 10.7. Place heater in position. (Check flue and gas connection posi-tions. Refer to gas connection instructions on page 12 and flueinstallation instructions on pages 14 & 15).8. Remove the pedestal front by unscrewing two screws eitherside. Refer figure 11.10Installation Instructions9ClearancesInstallation