Cannon STRATFORD 10530G MK2 Use And Installation Instructions

Contents

UNPACKINGUnpack the components from inside the grill and oven: Check that the following partsare present.Grill pan and grid Pan supports (4)Meat tin Enamelled burner caps (4)Oven shelves (2) Literature packBattery Aluminium burner bodies (4)LEVELLINGFour skid feet are fitted which can be screwed in or out to level the cooker. Move thecooker by pushing at both sides on the lower half of the oven door.CAUTION: Some soft floor coverings may get damaged if the cooker is not movedcarefully.STABILITY BRACKETThe back of the cooker has a slot for engagement of a stability bracket, which can beobtained, as an extra, from the cooker supplier. The leaflet included with the bracketshould be read in conjunction with the following instructions.Push cooker to its intended position.Draw pencil lines on the floor in line with the front and left side of the plinth.Remove the cooker.Position stability bracket in accordance with Fig. 5 and secure to the floor.Measure height from floor level to the bottom of the slot in the back of thecooker.Add 3mm to the dimension and assemble the stability bracket to that height.(i.e. from floor level to the underside of the top member)Fig. 5 Fig. 621PENCIL LINE‘B’410mm‘A’92mm

/ 24

Related manuals for Cannon STRATFORD 10530G MK2