Cannon WORCESTER 10525G Use And Installation Instructions

Also see for WORCESTER 10520G: Brochure & specs

UNPACKING THE COOKERUnpack the components. Check that the following parts are present.Grill pan and gridBaking dish Pan supports (2)Oven shelves (2) Enamelled discs (4)LiteratureAluminium burner bodies (4)LEVELLINGFour skid feet are fitted which can be adjusted up or down to level the cooker.CAUTION: Some soft floor coverings may get damaged if the cooker is not movedcarefully.STABILITY BRACKETOne of the holes in the lower rear panel can be used toengage a stability bracket. The bracket must be fitted tothe wall behind the cooker. The diagram is a guide tothe correct height at which the bracket should be fromthe floor.CONNECTING TO GAS SUPPLYThe cooker is designed to match the depth of standard600mm worktops. An adaptor backplate should,therefore, be fitted within the shaded area shown toallow the cooker to be pushed fully to the wall. If aforward facing backplate is used, it must be chased intothe wall.Connection to the cooker should be made with an approved applia nce flexibleconnection to BS 669. Hoses connected to the LPG models should be suitable for LPGand capable of withstanding 50mbars pressure. A length of 0.9 to 1.25m isrecommended. The length of hose chosen should be such that when thecooker is in situ, the hose does not touch the floor.The temperature rise of areas at the rear of the cooker that are likely to come incontact with the flexible hose do not exceed 70 oC.21INSTALLATION INSTRUCTIONS155mmFloor to top edgeof bracket.530300200250250680550

/ 24

Related manuals for Cannon WORCESTER 10520G