30 • Videoagain the camcorder isready to start recording within approx.1 second*, ensuring you do not missimportant shooting opportunities.* The exact time required until the camcorderis ready to start recording may varydepending on the shooting conditions.1 Press firmly.The standby lamp flashes at firstwhile the camcorder is preparing andthen stays on when it enters thestandby mode.2 When you wish to resumerecording, pressagain.Within approx. 1 second, thecamcorder is ready to record.NOTES• When you wake up the camcorder fromstandby mode, the following settings willbe changed automatically:- Manual focus returns to automaticfocus (AF).- Manual exposure adjustment returns toautomatic exposure.- Zoom position returns to full wideangle W.• The camcorder will shut off if left instandby mode for 10 minutes, regardlessof the [POWER SAVE] setting ( 65).You can select the length of time untilshut-off with the [ STANDBY OFF]setting ( 65).To restore the power if the camcordershut off, turn the switch towardMODE and release it, or turn thecamcorder off and then on again.• If you perform any of the followingactions while in standby mode (while thestandby lamp is on), the camcorder willbe woken up from standby mode.- Open the disc compartment cover.- Change the position of the /switch.- Turn the switch toward MODE.Reviewing and Deleting the Last SceneRecordedEven in mode you can playback the last scene recorded in order tocheck it. If you are using a DVD-RWdisc, you can also delete the scenewhile reviewing it.1 If the joystick guide does notappear on screen, press todisplay it.If does not appear on the joystickguide, repeatedly push the joystick( ) toward [NEXT] to display it.2 Push the joystick ( ) toward .• The camcorder plays back the lastscene (but without sound) andreturns to record pause mode.• While reviewing the scene, selectthe icon and press to returnto the recording mode.( 18)QUICK STARTQUICK STARTQUICK START( 18)NEXTCOPY