Advanced Guide > About Network Communication > Changing and Confirming Network Settings > Monitoring WirelessLAN StatusMonitoring Wireless LAN StatusNoteWhen using the printer over the Wired LAN, Signal Strength, Link Quality, or Advanced Measurementis not available.1. Start up the Canon IJ Network Tool.Starting up Canon IJ Network Tool2. Select the printer in Printers.3. Select Status from the View menu.1. Signal StrengthIndicates the strength of the signal received by the printer, ranging from 0% to 100%.2. Link QualityIndicates the signal quality excluding the noise while communicating, ranging from 0% to 100%.ImportantIf the indicated value is low, move your printer closer to the wireless network device.3. Advanced MeasurementClick to examine the connection performance between the printer and the access point. Followthe instructions on the screen to start measuring and display the status. Measurement takes afew minutes.When is displayed in Connection Performance between the Printer and the Access Point,the printer can communicate with the access point. Otherwise, refer to displayed commentsand Help for improving the status of communication link.NoteIf any messages appear on Overall Network Performance, move the machine and accesspoint as instructed to improve the performance.Page topPage 779 of 815 pagesMonitoring Wireless LAN Status
