100You can change the look of an image when shooting. However, the shootingconditions may cause the image to become coarse, or the colors may notcome out as expected.T Color AccentYou can select to retain a single color and change the rest to black and whitein a composition.Select T.● Follow Step 1 on p. 59 to select T.Press the l button.● The unchanged image and the ColorAccent image will both display.● The color for default settings is green.Specify the color.● Position the center frame so it is filled withthe color you want and press the q button.X The specified color will be recorded.Specify the range of colors.● Press the op buttons or turn the  dialto change the range of colors to be retained.● Select a negative value to limit the rangeof colors. Select a positive value to extendthe range of colors to similar colors.● Pressing the l button accepts thesetting and restores the shooting screen.Y Color SwapYou can swap one color in an image for another when recording it. You canonly swap one color.Changing the Color and ShootingRecorded color• Using the flash may cause unexpected results in this mode.• The recorded color will be saved even if you turn off the power.COPY
