Check the Page Size list. When you want to change, select another page size from the list. The listdisplays only sizes that can be used for borderless printing.4. Adjust the amount of extension from the paperIf necessary, adjust the amount of extension using the Amount of Extension slider.Moving the slider to the right makes the amount larger and moving the slider to the left makes theamount smaller.It is recommended to set the slider at the second position from the right for most cases.ImportantWhen you set the slider at the rightmost position, the back side of the paper may becomesmudged.5. Complete the setupClick OK.The data will be printed without any margins on the paper.ImportantWhen a page size that cannot be used for borderless printing is selected, the size is automaticallychanged to the valid page sizes for borderless printing.When High Resolution Paper, T-Shirt Transfers, or Envelope is selected from the Media Type list onthe Main tab, you cannot perform borderless printing.When Borderless is selected, the Printer Paper Size, Staple Side (when Duplex Printing is notselected) settings, and the Stamp/Background... button on the Page Setup tab appear grayed outand are unavailable.Print quality may deteriorate or the sheet may be stained at the top and bottom depending on thetype of the media used.When the ratio of the height to the width differs from the image data, a portion of the image may notbe printed depending on the size of the media used.In this case, crop the image data with an application software according to the paper size.NoteWhen Plain Paper is selected for Media Type on the Main tab, borderless printing is notrecommended, and therefore the dialog box for media selection appears.When you are using plain paper for test printing, select Plain Paper, and click OK.Expanding the Range of the Document to PrintSpecifying a large amount of extension allows you to perform borderless printing with no problems.However, the portion of the document that extends off the paper range will not be printed. Subjectsaround the perimeter of a photo may not be printed.Try borderless printing once. If you are not satisfied with the result of borderless printing, reduce theamount of extension. The extension amount becomes shorter as the Amount of Extension slider ismoved to the left.ImportantWhen the amount of extension is shortened, an unexpected margin may be produced on the print,depending on the size of the paper.NoteWhen the Amount of Extension slider is set to the leftmost position, image data will be printed in thefull size.When Preview before printing is checked on the Main tab, you can confirm before printing whetherthere will be no border.Page 229 of 678 pagesBorderless Printing
