Canon 5246B002 Instruction Manual

392 Take the picture.Check that the <D> lamp is lit, pointthe remote control transmitter towardthe camera, and press the remoterelease button.X The picture is taken two secondslater.When wireless flash shooting isenabled and the power switch on the320EX is set to <SLAVE>, the 320EXfires.When you press the remote release button during bulb shooting, theshutter opens two seconds later. Press the remote release button againto close the shutter.Bulb (Long Exposure) ShootingIf the flash-ready lamp is not lit, pressing the remote release button does nottake a picture.Be careful not to cover the remote control transmitter or wireless sensorof the 320EX with your hand.The remote control function has an operation range of about 5 m /16.4 ft. from the front of the camera.Check the shooting results while performing remote control shooting.When the power switch on the 320EX is set to <ON> and you press theremote release button, a picture is taken two seconds later in the sameway as with the Remote Controller RC-6. The 320EX does not fire.COPY