54Flash Control from the Camera’s Menu ScreenFlash firingTo perform flash photography, set to [Enable]. To use the flash's AF-assist beam only, set to [Disable].E-TTL II flash meteringFor normal exposures, set it to [Evaluative]. If [Average] is set, theflash exposure will be averaged for the entire scene metered by thecamera. Flash exposure compensation may be necessarydepending on the scene. This setting is for advanced users.Flash synchronization speed in Av modeYou can set the flash synchronization speed when shooting in <f>aperture-priority AE mode with flash.Flash modeYou can select the flash mode from [E-TTL II], [Manual flash],[MULTI flash], [AutoExtFlash], and [Man.ExtFlash] to suit yourdesired flash photography.Shutter sync settingsYou can select the flash firing timing/method from [1st curtain], [2ndcurtain], or [High-speed synchronization]. To perform normal flashphotography, set [1st curtain].Flash exposure compensationWith a similar procedure as exposure compensation, you can adjustthe flash output. The flash exposure compensation amount can beset up to ±3 stops in 1/3-stop increments.FEBYou can take three shots while automatically changing the flashoutput. The settable range is up to ±3 stops in 1/3-stop increments.
