12 Windows 98Installing the DVC Storage DriverThe procedure for installation of the DVC Storage Driver differs depending onthe computer you are using. Confirm the OS of your computer and go to theappropriate page as stated below.Windows 98 ( 12), Windows Me ( 17), Windows 2000 ( 21),Windows XP ( 27).• Be sure to install the DIGITAL VIDEO SOLUTION DISK before youconnect the camcorder to the computer.• Once you connect the camcorder to your computer after installing theDigital Video Solution Disk, make absolutely sure not to turn off thecamcorder before installation of the DVC Storage Driver is complete.Windows 98Installing the DVC Storage Driver1. Connect the Power Adapter to the camcorder.2. Connect the camcorder to the computer using the suppliedUSB cable ( 32).3. Slide the POWER switch to PLAY(VCR) and the TAPE/CARDswitch to CARD.• The Add New Hardware Wizard will open.4. Click [Next].5. Select [Search for the best driver for your device.[Recommended].] and then click [Next].