Canon BJC 50 - Color Inkjet Printer Service Manual

2. TRANSPORTING THE PRINTERWhen carrying or transporting the printer, leave the BJ cartridge in or place it in thecartridge container to prevent ink leakage and drying of cartridge nozzles. The printermay be left installed.2.1 Carrying the PrinterBefore carrying the printer, do the following:1) Press thePOWER button to turn the printer off and close the top cover. When thepower goes off, the display turns off.2) Unplug the interface cable.3) Disconnect the DC plug of the Universal adapter from the printer. Disconnect theAC plug of the Universal adapter from the outlet.4) Make sure that the BJ cartridge is at the capping position (right edge of the printer).If it is not at the capping position, turn the printer on again and perform step 1 andsubsequent steps to move the carriage to the capping position.5) Slide the Lock switch to the lock position.If you cut off the power to the printer by just disconnecting the Universaladapter or take out the BJ cartridge and carry it around by itself, thecartridge is not capped, so ink can leak or dry up in the nozzles.2.2 Transporting the PrinterBefore transporting the printer, do the following:1) Disconnect the interface cable and the Universal adapter in the same way as whencarrying the printer.2) Pack the printer and Universal adapter with the original packing materials.If you have thrown the original packing materials away, pack the printerwith plenty of shock absorbing material.3-11BJC-50Part 3: Operating Instructions