101Wireless ConnectionEnding the wireless connectionz If displays during wireless connection, it means that theconnection is very good. The fewer the antennas displayed,the worse the wireless connection is. When and thewireless lamp both blink, it indicates an extremely badconnection. In such a case, shorten the distance betweenthe camera and the wireless adapter.zPlease be aware of the points below when using a wirelessconnection between the camera and a printer. Failure tofollow these instructions may terminate the connection.- Do not use a wireless connection near to a microwaveoven or any other appliance which emits electromagneticwaves.- Do not put the camera and the printer far apart.- Do not place objects in between the camera and printer.z If a number of wireless print adapters are available forconnection, select [Target Device] and press the DISP.button to confirm which wireless print adapter you canconnect to. The lamp on the available adapter will blink inthe following sequence: blue, blue, orange.z If you slide the mode switch while using a wirelessconnection to a printer, the wireless connection will beterminated.z If you end the wireless connection while printing, printingwill be interrupted.1 Slide the mode switch to (playback)(Wireless) Menu [Connect/Disconnect]See Menus and Settings (p. 32).2 Use the or button to select [Discon-nect], then press .zThe wireless connection will end.
