70Chapter 3 How to Use the Printer DriverNote• Click [Defaults] to return the printer to the default settings on the [Detailed Settings] dialogbox.• The print image with selected color corrections is displayed in the [Print Image AfterChanging Settings] section of the window.• [Brightness] can not be selected when [Color Correction] is set to [Disable].• [Brightness] can not be selected when a paper type associated with Profile (the startcharacter is "*") is selected.Adjusting the DensityThe overall density of the printout can be adjusted if you are dissatisfied with the results.1 Click the [Detailed Settings] in the [Color] tab. P.622 Adjust the density by moving the slider, and then click [OK].The center of the slidebar is the default position (0). The slider can be moved between -50 to +50.Moving the slider to the left decreases the density. Moving the slider to the right increases thedensity.
