PlaybackBasic Functions33(approx. 1 second) at the point where theplayback switches from Layer 1 to Layer 2.You can display the date and time of therecording and other camcorder data registeredwhen the recording was made ( 51).TO ADJUST THE VOLUMEThe camcorder plays the sound with thebuilt-in speaker. The sound will be mutedwhen you close the LCD panel or connectthe stereo video cable to the AV terminal.During the playback of a scene:1 If the joystick guide does not appearon screen, press ( ) to display it.2 Push the joystick ( ) toward orto adjust the volume.• To turn off the volume completely,keep pressing ( ) until the volumeicon changes to .• You can press ( ) again to hide thejoystick guide during playback.SPECIAL PLAYBACK MODESFast PlaybackDuring normal playback, press oron the camcorder. Repeatedly pressthe button to increase the playbackspeed.Fast playback: 5x → 15x → 25xthe normal speed.Slow PlaybackDuring playback pause, press oron the camcorder. Repeatedly press thebutton to increase the playback speed.Slow playback: 1/16 → 1/8 → 1/4the normal speed.Skipping ScenesDuring playback, push the joystick ( ) toskip to the next scene. Push the joystick( ) to skip to the beginning of the currentscene. Push the joystick ( ) twice to skipto the previous scene.Note that you do not have to display thejoystick guide above to skip the scene.NOTESThere is no sound during special playbackmodes.During some special playback modes, youmay notice some video problems (blocky videoartifacts, banding, etc.) in the playback picture.Slow playback is not available with discsinitialized in VIDEO mode.Depending on the recording, you mightoccasionally notice a brief stop of the picture orsound at the point where the scene changes.Displaying the Photos1 Move the power switch to ON, thenslide it down toward MODE andrelease it to set the camcorder inPLAY mode.The green PLAY indicator will turn on.2 Move the / switch to the(Still images) position.3 Use the joystick ( ) to movebetween images.( 12)