Canon DC22 - 2.2MP DVD Camcorder Instruction Manual

Also see for CameraWindow: Instruction manual Software guide Software guide Software guide

Contents

Canon DC22 - 2.2MP DVD Camcorder Instruction Manual Manual pdf 20 page image

20 Installing the Digital Video SoftwareInstalling the Digital Video Software Be sure to install the Digital Video Software before connecting thecamcorder to the computer. Users of Windows 2000 or Windows XP must first log in as an Administratorto install programs.Windows XP Users:Your digital video camcorder is equipped with the standard Picture TransferProtocol (PTP). This protocol enables you to download still images by simplyconnecting the camcorder to a computer with the USB cable (the software suchas the [Scanner and Camera Wizard] starts automatically).However, please note that there are several limitations to downloading stillimages with this method. To avoid these problems, install ZoomBrowser EX todownload still images. It may take a few minutes, after connecting the camcorder, until you candownload still images. Still images protected on the camcorder may lose this setting once they aredownloaded to the computer.1 Check a camcorder is not connected to the computer.While a camcorder is connected to the computer, the software cannot beinstalled normally. If a camcorder is connected, detach the USB cable from thecomputer.2 Set the DIGITAL VIDEO SOLUTION DISK in the computer’sCD-ROM drive.If the installer panel does not open automatically, use the following proceduresto display it.- Windows 98/Windows Me/Windows 2000:1) Double-click the [My Computer] icon.2) Right-click the CD-ROM icon and select [Open] from the displayedmenu.3) Double-click the [SETUP.EXE] icon.- Windows XP:1) Select [My Computer] from the [start] menu.2) Right-click the CD-ROM icon and select [Open] from the displayedmenu.3) Double-click the [SETUP.EXE] icon.Depending on the setting of your computer, the file extension “.EXE” may notappear.3 Select your country or region.4 Select your language.