41Basic FunctionsPlaybackEViewing Still Images1. Move the power switch to ON.2. Slide down the power switchtowards MODE and release it toset the camcorder in PLAY mode( 12).The green PLAY indicator will turn on.3. Move the / switch to the(Still images) position.4. If necessary, change the mediafor the still images using theprocedure described in theRecording Still Images section( 36).As long as you do not change the mediaselection, the camcorder will show thestill images recorded on the media thatwas selected last.5. Use the multi selector to move( ) between images. The following may not be displayed correctly: Images not recorded with thiscamcorder, images edited on or uploaded from a computer (except for thesample images for the Card Mix function), and images whose file names havebeen changed. When the disc/card access display (“ ” or “ ”) appears on screenand when either the DISC access or CARD access indicator is on or flashing donot perform the following actions. Doing so may result in permanent data loss.- Do not open the disc or memory card cover and do not remove the disc ormemory card.- Do not disconnect the power source or turn off the camcorder.- Do not change the position of the / switch or the operating mode.Slideshow1. Press the FUNC. button.2. Use the multi selector to select ( ) [ SLIDESHOW] and press ( ).3. Use the multi selector to select ( ) [START] and press ( ).Press the FUNC. button to stop the slideshow.( 60) SLIDESHOW
