80Downloading Images to a ComputerThis topic briefly explains how to use ImageBrowser to perform a range of operationsfrom downloading the camera’s images to printing them.• For a more detailed explanation, please see the ImageBrowser Help menuor PDF manual, ImageBrowser Software User Guide (p. 4).If the Continue Connection Confirmation Message Displays• A message asking whether you wish to remain connected may appear when theauto power down function is set to [On], the camera and computer areconnected via the USB interface, and the connection is idle for a set period oftime (usually about 5 minutes). If the connection remains idle, the camera willdisconnect after approximately 1 minute.Press the camera’s shutter button or On / Off Button to reconnect. Please see theCamera User Guide for more information.○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○Starting ImageBrowser-USB Port Connection (Mac OS 8.6 - 9.2)1. Attach the supplied USB cable to the computer’s USB port and the camera’sDigital Terminal. Prepare the camera for communication with the computer.• For USB interface connection instructions, see “Connecting to a USB Port” (p. 16).• ImageBrowser will start and open the ImageBrowser Automation Wizarddialog.2. Confirm that [Display Images] is selected and click the [OK] button.Confirm that thisoption is selected.The Communications Settings dialog will display. This dialog only appearsthe first time the camera is connected.
