32 Basic FunctionsContinuing to Press the Shutter Button FullyIf you continue to press the shutter button fully after shooting, theimage will display until the button is released.Pressing the SET ButtonIf you press the, SET button while continuing to press the shutterbutton fully, it will continue to display even when you release theshutter button. To cancel the review, press the shutter button halfway.• You can erase an image right away while it is displayed (p. 24).Changing the Default Review SettingThe default review time is approximately 2 seconds. This can eitherbe turned off or set to approximately 10 seconds.Display the Rec. menu(Ü p. 72)• is not available in the modes.• Use the or button to select theicon.• Use the or button to select Off,2 sec. or 10 sec.• No image will display when the reviewfunction is set to Off unless youcontinue to press the shutter buttonfully after shooting.• With the 2- or 10-second options, theimage will display for the specified timeeven if the shutter button is releasedright after shooting.• With the 2- or 10-second options, youcan display the image for longer thanthe specified time as long as the shutterbutton is held down continuously.• You can shoot another image evenwhile an image is displayed.
