95Using a Memory CardERecording a Still Image on a Memory Card WhileRecording Movies on a TapeWhen you are recording a movie on a tape, you can record the same picture as a stillimage on the memory card. Select the image quality from normal or fine.1. Open the menu and select [CAMERA SETUP]. Select [STILL I.REC], setit to [ FINE] or [ NORMAL] and close the menu.2. While you are recording a movie, press the PHOTO button. The size of the still image will be 640 x 480. The quality of the still image is slightly lower than a still image recorded inCARD CAMERA mode. The still image cannot be recorded on a memory card when a fader, effect orthe multi-image screen is activated. The still image cannot be recorded on a memory card when the widescreenmode is selected. “ ” appears when you press the PHOTO button when [STILL I.REC] isset to [OFF].Recording from a Tape in the Camcorder1. Play back the tape.2. Press the PHOTO button halfway when the scene you wish to recordappears.• The camcorder pauses playback. The remaining image capacity and otherinformation appear.• When you press the PHOTO button on the wireless controller, recording startsimmediately.3. Press the PHOTO button fully.• The card access indicator flashes.• You can also record a still image by pressing the PHOTO button fully when the tapeis in playback pause mode.CAMERA PLAY (VCR) CARD CAMERA CARD PLAYMENU( 38) CAMERA SETUP STILL I.REC•• OFFCAMERA PLAY (VCR) CARD CAMERA CARD PLAY
