Canon EOS 1 Instructions Manual

Also see for EOS 1N: Instruction manual Parts catalog Instructions Instructions Instructions

Contents

Canon EOS 1 Instructions Manual Manual pdf 27 page image

• If a shutter speed of 30” and the maximum aperture value blink in the display, the sub-ject is too dark. Switch to flash photography, referring to “V. Using Flash” on page 76.• If a shutter speed of 8000 and the minimum aperture value blink in the display, thesubject is too bright. Attach a neutral density (ND) filter to the lens.27Program AE mode [P]● Six-Second TimerWhen you release the shutter button after pressing it halfway, the LCDpanel and viewfinder displays remain active for six seconds.● Program Shift FunctionWhen taking pictures in Program AE mode, you can “shift the program” tochange the set shutter speed and aperture value combination while main-taining the same exposure.After pressing the shutter button halfway, turn the main dial until thedesired shutter speed/aperture value combination is displayed.[Exposure Warnings]Remaining frame counter● Remaining Frame CounterWhen nine frames or less remain on the roll, the number ofremaining frames is displayed in the viewfinder below the expo-sure level display. “F” indicates that 10 or more frames remain onthe roll. When less than 10 frames remain, the display countsdown the frames in descending order: 9, 8 ... 2, 1.• Non-DX films are identified as 36-exposure rolls, and the remainingframe counter operates accordingly.00. Part.1 RS (E) (P.13~27) 27-01-2003 11:54 Page 27