Specifying Camera Settings from Your Computer6-7Personal Function SettingsP.Fn-01P.Fn-02P.Fn-03P.Fn-04P.Fn-05P.Fn-06P.Fn-07P.Fn-08P.Fn-09P.Fn-10P.Fn-13P.Fn-14P.Fn-15P.Fn-16P.Fn-17P.Fn-18P.Fn-19P.Fn-20P.Fn-21P.Fn-23P.Fn-24P.Fn-25P.Fn-27P.Fn-28You can specify the Personal Function settings listed below in the different tab sheets.[Exposure Functions 1]Disables the shooting modes. (➞6-9)Disables the metering modes. (➞6-9)[Exposure Functions 2]Specifies the metering mode for manual exposure. (➞6-10)Sets the maximum and minimum shutter speeds to be used. (➞6-10)Sets the maximum and minimum apertures to be used. (➞6-11)[Exposure Functions 3]Registers and switches the shooting mode and metering mode. (➞6-11)Repeats bracketing during continuous shooting. (➞6-13)Sets the number of shots to be bracketed. (➞6-13)Changes the bracketing sequence for C.Fn9-2/3 to increased exposure, stanadrd exposure, and decreased exposure. (➞6-13)Retains the shift amount for program shift. (➞6-14)[AF Functions]Executes AI Servo AF continuous shooting giving priority to the drive speed. (➞6-15)Disables focus detection (search driving) by the lens drive. (➞6-15)Disables the AF-assist beam from being emitted. (➞6-15)Enables automatic shooting when focus is achieved at the fixed point of focus while the shutter button is pressed fully. (➞6-16)Disables automatic AF point selection (➞6-16)Enables automatic AF point selection when C.Fn-11-2 has been set. (➞6-17)[Drive Functions]Sets the continuous shooting speed. (➞6-17)Limits the number of shots during continuous shooting. (➞6-17)Enables silent operation when the shutter button is OFF after picture-taking. (➞6-18)[Other Functions 1]Changes the timer’s time length. (➞6-18)Illuminates the LCD panel during bulb exposures. (➞6-19)[Other Functions 2]Sets the default settings when the CLEAR (QUALITY+WB) button is ON. (➞6-19)[Other Functions 3]Enables the electronic dial’s function to be used in the reverse direction. (➞6-20)Prevents exposure compensation with the Quick Control Dial. (➞6-20)[Combination]Allows you to check the settings (➞6-21)Allows you to save the settings (➞6-22)Allows you to load the saved settings (➞6-23)* Omission of P.Fn-11, 12, 22 and 26The numbers and descriptions for P.Fn-0 to P.Fn-28 contain some omissions due to the factthat some functions on the EOS-1V are omitted on the EOS-1D, but the same PersonalFunction numbers are used on both models.