142Setting Custom Function GroupsMENUUsing a Custom Function GroupMENUAfter following the procedure on the preceding page to register a Custom Function group,follow the procedure below to apply the Custom Function group’s settings to the camera.On the menu, select “Personal Func-tions (P.Fn).”• Press the < > button.• While pressing the < > button, turn the < >dial to select < >.• While pressing the < > button, turn the < >dial to select “Personal Functions (P.Fn).” Then letgo of the < > button.1Select “P.Fn 0.”• While pressing the < > button, turn the < >dial to select “P.Fn 0.”2Select “Apply.”• While pressing the < > button, turn the < >dial to select “Apply.” Then let go of the < >button.s If the P.Fn 0 group has not been registered, “Apply”cannot be selected. First follow the procedure in“Set Custom Function Groups.” (→p.140)3Select the group number to be applied.• While pressing the < > button, turn the < >dial to select “P.Fn-0-1,” “P.Fn-0-2,” or “P.Fn-0-3.”Then let go of the < > button.s When you select a registered group number, therespective Custom Function settings (“Registeredcontents”) will be displayed. If you select anunregistered group number, the “Not registered”message will appear.4
