2143 Menu Function SettingsSilent LV shooting• Mode 1The shooting operation noise is quieter than with normal shooting.Continuous shooting is also possible. At <o>, the maximumcontinuous shooting speed will be approx. 12 shots/sec. At<K>, it will be approx. 14 shots/sec.• Mode 2When the shutter button is pressed completely, only one shot willbe taken. While you keep holding down the shutter button, thecamera operation will be suspended. Then when you return to theshutter button’s halfway position, the camera operation willresume. The shooting noise is thereby minimized. Even ifcontinuous shooting is set, only a single shot will be taken.• DisableBe sure to set this function to [Disable] if you use a TS-E lens(other than those listed in below) for shifting or tilting the lensor if you use an Extension Tube. Setting it to [Mode 1] or [Mode 2]will result in incorrect or irregular exposures.When you press the shutter button completely, the shutter willsound like it took two shots. However, only one shot will be taken.Metering timerYou can change how long the exposure setting is displayed (AE lock time).If you use flash, silent shooting will not be possible regardless of the[Silent LV shoot.] setting.When using a non-Canon flash unit, set this function to [Disable]. Theflash will not fire if it is set to [Mode 1] or [Mode 2].If the ISO speed is set to ISO 32000 or higher (when the camera’s internaltemperature is low, ISO 20000 or higher), the maximum continuousshooting speed at <o> will be approx. 10 shots/sec.With the TS-E17mm f/4L or TS-E24mm f/3.5L II lens, you can use [Mode 1] or [Mode 2].If you select [z1: Set Custom WB], [z3: Dust Delete Data], [53:Sensor cleaning], [54: Clear all camera settings], or [54: z Firmwarever.], the Live View shooting will end.
