129Menu Settings8Menu SettingsMENUReview timeWhen “Review” is set to “On” or “On (Info),” you can set thenumber of seconds the image is displayed on the LCD monitor.(→p.53)Noise reductionWhen turned on, noise reduction can reduce noise in theimage that is prone to occur during bulb exposures.Protect imagesYou can protect all the images in the selected folder or CF cardto prevent accidental erase. Or you can cancel the imageprotection. Choose “Select all in folder,” “Clear all in folder,”“Select all on CF card,” or “Clear all on CF card.” (→p.120)Erase all on CF cardThis erase all the unprotected images on the CF card.(→p.125)Highlight alertWhen the display format has been set to (single imagewith information) or single image, the overexposed highlightareas of the image will blink on the LCD monitor when“Highlight alert” is “On.” (→p.118)Display AF pointsWhen the display format has been set to (single imagewith information), you can set “Display AF points” to “On” or“Off.” (→p.118)The active AF point will be displayed for the One-Shot AF andthe selected AF point for the AI Servo AF.The noise reduction process will take the same amount oftime as the exposure time.
