94Set the ISO speed that is to be the standard AEB exposure. Forexample, if you want AEB with ±1 stop and ISO 200, 400, and 800, setthe ISO speed to 400.Set the AEB amount.¡Hold down the <E> and <Q>buttons simultaneously and turn the<5> dial.¡The diagram on the left shows an AEBamount of ±1 stop centering on thestandard exposure level. The AEBamount (1.0), the AEB range <N>,and the <i> icon will be displayed.¡The shooting operation will be thesame as AEB shooting while changingthe shutter speed or aperture.AEB with the ISO Speed¡ AEB shooting (by changing the shutter speed/aperture or ISO speed)cannot be used with flash photography and bulb exposures.¡ AEB shooting is possible only within the settable shutter speed range (1/8000 - 30 sec. ), aperture range, and ISO speed range (100 - 1600). It isnot possible with ISO 50 and 3200 even if the ISO speed extension is[On].¡ If you use C.Fn-06-2 to set the exposure setting increment to 1/2 stop,AEB shooting with the ISO speed will not be possible.¡ In the continuous shooting mode, holding down the shutter button willtake all three bracketed shots continuously, then the shooting will stopautomatically (except during mirror lockup).¡ When AEB is used with the self-timer, the three bracketed shots will betaken in succession after the 2- or 10-second self-timer delay.¡ If the drive mode is set to single shooting, press the shutter button threetimes to take the three AEB shots.¡ AEB can be combined with exposure compensation.¡ During AEB shooting, the <w> icon in the viewfinder and the <h> or<g> icon on the LCD panel will blink.
