8112345IntroductionContents ata GlanceBasicOperationAdvancedOperationAdvancedImage Editingand PrintingEditing JPEGImagesIndexProcessingLarge Numbersof ImagesReferenceYou can adjust white balance using a selected part of an image as thestandard for white to make the image appear natural. Using click whitebalance is effective when using it in parts of an image where white colortone has changed under the influence of a light source.1 Click the [ ] button.Adjusting Color Tone Using Click White Balance 2 Click on a point that is to be the standard for white.¿ The color of the image is adjusted with the point you selected asthe standard for white.O If you click on another point in the image, the white balance isadjusted again.O To finish click white balance, click the [ ] button again.The coordinates of the cursor position and the RGB values (8-bitconversion)When there are no white areas in your image, you can adjust the whitebalance by clicking on a grey point of the image in step 2. This has thesame adjustment result as selecting a white point.When there are no white areas in your imageO The image is adjusted based on the average value of 5 × 5 pixelrange from the clicked point.O The histogram display changes according to adjustment. You canalso fix the histogram display to the display before anyadjustments (p.67).
