105Vertical shots can be rotated automatically so that they are displayedupright during playback.1 Select [Auto rotate].Turn the <5> dial to select [c Autorotate], then press <0>.2 Select [On].Turn the <5> dial to select [On],then press <0>.3 Take a vertical shot.For the image review right after imagecapture, the image will not bedisplayed vertically on the LCDmonitor.4 Playback the image.Press the <x> button.X The vertical shot will be displayedvertically as shown on the left.3 Auto Image RotationAuto rotate will work only if [Auto rotate] has been set to [On]. Autorotate will not work with vertical images captured while [Auto rotate] was[Off].If the vertical image is taken while the camera is pointed up or down, theimage might not rotate automatically for playback.When you change the camera’s orientation between horizontal and vertical,the camera orientation sensor will make a small sound. This is normal andnot a defect.
